Aeg-Electrolux LAV88810 Bedienungsanleitung

LAVAMAT 88810Washing MachineUser information

10Prior to using for the first timeSwitching on the appliance for the first time - setting the languageThe display is set to English as standard in th

11Setting the timeSo that the time and the end of the program are correctly displayed, please check the display and set the current time if necessary.

12Running a wash cycleAdding detergent/conditionerImportant: Only use detergents/conditioners that are suitable for use in household washing machines.

13Softener, wash-care products to preserve the shape of garments, starch Fill the compartment to no more than the MAX indicator. Add water to thick li

14Changing the temperature Press the TEMP. key repeat-edly until the desired tem-perature is displayed.Changing spin speed/selecting rinse hold Press

15Opening the door/Loading the washing1. To open the door: pull the handle on the door.2. Unfold washing and load it loosely into the machine. Mix lar

16Setting optionsOptions can be added to a wash cycle that has already been selected.Press the OPTIONS key. The display shows the symbols for the opti

17Prewash, Sensitive, Stain, Night Cycle 1. Press the OPTIONS key re-peatedly until the desired symbol flashes, e. g., PREWASH (With each press of the

18Setting timesShortened cycles and the delay of the start time can be set for a wash cycle that has already been selected.Press the TIME key. The dis

19Delay Start1. Press the TIME key repeatedly, until the DELAY START symbol flashes.2. Press the OK key. “Start in 0 min” is shown in the display.

2Dear Customer,Please read this user information carefully and keep it to refer to later.Please pass the user information on to any future owner of th

20Starting a programme1. Check that the water tap is open.2. Press the START/PAUSE key.The programme is started or it starts after the time delay set

21Adding washing1. Press the START/PAUSE key. • If “Door locked” and “Pause” are alternately shown in the display, it is no longer possible to add was

22SetupThe special functions that can be set under Setup remain permanently stored independent of each washing cycle – even after the appliance has be

233 The Memory can be overwritten at any time with a new programme combination (see “Changing the Memory”), but cannot be deleted.Changing the Memory1

24Extra Rinse1. Turn the program knob to any program and press the OPTIONS key repeatedly until the SETUP symbol flashes.2. Press the OK key. 3. Pres

25Clock1. Turn the program knob to any program and press the OPTIONS key re-peatedly until the SETUP symbol flashes. 2. Press the OK key.3. Press the

26Contrast and brightness1. Turn the program knob to any program and press the OPTIONS key re-peatedly until the SETUP symbol flashes.2. Press the OK

27Child safety deviceIf the child safety device has been activated, the door can no longer be shut.Activating the child safety device:Use a coin to tu

28Cleaning and maintenanceImportant! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body wit

29Door and rubber collarRegularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass

3ContentsOperating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Safety . . . . . . . . . . . . . . . . . . .

30Display shows: “No inco-ming water/Check tap & Hose”Tap turned off. Turn the tap on.The filter in the threaded inlet hose fitting is blocked.Tur

31If the wash result is not satisfactoryThe washing is grey and there are limescale deposits in the drum• Too little detergent was used.• An incorrect

32Carrying out an emergency drain1 Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from th

33Drain pumpThe drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pum

34Disposal2Packaging materialThe packaging materials are environmentally friendly and can be recy-cled. The plastic components are identified by marki

35Technical data5This appliance conforms with the following EU Directives:– 73/23/EEC dated 19.02.1973 Low Voltage Directive– 89/336/EEC dated 03.05.1

36Installation and connection instructions1 Safety information concerning installation• This washing machine cannot be built-in.• Before using for the

37Installing the applianceTransporting the appliance1 Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when liftin

383. Remove both plastic caps sideways. 3 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance.4. Use special spanner

39• If the location in which the appliance is to be installed is fitted with small-format tiles, put a rubber mat (available in the shops) under the a

4What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Remedying small malfunctions . .

40Electrical ConnectionAny electrical work required to install this appliance should be carried out by a qualified electrician or competent person.1 W

41The switch must not break the yellow and green earth cable at any point.This appliance complies with the requirements laid out in the EEC Di-rective

42Water inletA 1.35m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses from the manufacturer are to be

43Water DrainageThe appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The

44Pumping heights of over 1 metreThe washing machine’s drain pump is able to pump water to a height of 1metre, calculated from the surface on which th

45Guarantee/Customer ServiceEuropean Guaranteewww.electrolux.comThis appliance is guaranteed by Electrolux in each of the countries listed at the back

46Lietuva +370 5 2780609 Verkių 29, LT09108 Vilnius Luxembourg +35 2 42 43 13 01 Rue de Bitbourg, 7, L-1273 Hamm Magyarország +36 1 252 1773 H-1

47Service and Spare PartsIf the event of your appliance requiring service, or if you wish to pur-chase spare parts, please contact Service Force by te

www.electrolux.comwww.aeg-electrolux.co.uk105 176 609-00-111206-05 Subject to change without notice

5Operating Instructions1 SafetyPrior to using the appliance for the first time• Follow the “Installation and connection instructions”.• If the applian

6General safety• Repairs to the washing machine may only be carried out by qualified/authorised service engineers. • Never use the appliance when the

7Description of the appliance Control panel What is shown in the display Three screw feet (height adjustable);rear left: Automatic footDetergent disp

8Programme overview Programmemax. Load(dry washing) Options Times Spin speed RINSE HOLD PREWASH SENSITIVE STAIN NIGHT CYCLE SHORT VERY SHORT DELAY STA

9Programmes/features:Care symbols1)1) The numbers in the care symbols show the maximum temperatures.Energy-saving programme at 60 °C for lightly to no