Aeg-Electrolux L14950A Bedienungsanleitung PDF herunterladen (Seite 8)

The programme progress display shows the washing or drying phases of the selected pro-

gramme. During a cycle, a black line blinks under the phase symbol of the running pro-

gramme. At the end of each phase, the line under the corresponding symbol becomes fixed.

If the OVERDOSAGE symbol lights up at the end of the programme, it indicates that too

much detergent has been used.

9.4 - DOOR

- symbol (Door locked)

• This symbol indicates if the door can be opened:

– the symbol is on: the door cannot be opened. The appliance is performing a washing

or drying programme.

– the symbol is blinking (in displays where it is set) : the door is opening in a few minutes.

– the symbol is off: the door can be opened. The washing programme or drying is fin-

ished.

9.5 - Options: PREWASH

, STAIN , SENSITIVE , DAILY , SUPER QUICK -

symbols

9.6 - CHILD SAFETY LOCK

- symbol

9.7 - The display shows the following information:

• Duration of the selected programme

After selecting a programme, the duration is displayed in hours and minutes (for example

) . The duration is calculated automatically on the basis of the maximum recom-

mended load for each type of fabric. After the programme has started, the time remaining

is updated every minute.

• Delay start

The selected delay (20 hours max) set by pressing the relevant button appears on the

display for a few seconds (for example

), then the duration of the previously selected

programme is displayed.

The DELAY START symbol will appear on the display. The delay time value decreases by

one unit every hour and then, when 1 hour remains, the time decreases every minute.

• Selected drying time

After selecting a drying programme, the drying time is displayed in minutes and/or hours

(max 250 mins).

After the programme has started , the time remaining id updated every minutes.

• Incorrect option selection

If an option, which is not compatible with the set wash programme is selected, the

message Err is displayed for a few seconds and the yellow light of button 7 starts blinking.

• Alarm codes

In the event of operating problems, some alarm codes can be displayed, for example

(see chapter «What to do if...»).

• End of the programme

When the programme has finished a blinking zero

is displayed, the DOOR symbol

disappears and the door can be opened.

9.8 - DRYING TIME duration

- symbol

9.9 - DELAY START

- symbol

Display

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Aeg-Electrolux L14950A Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Waschmaschinen Aeg-Electrolux L14950A