Aeg-Electrolux L73742VI Bedienungsanleitung

LAVAMAT 73742 VIUser manual Washing Machine

Measure out the detergent and the fabric softenerYour new appliance was designed to reduce water, energy and detergent consumption.1. Pull out the dis

Select the desired TEMPERATURE (Button 2)When selecting a programme, the appliance automatically proposes the default tempera-ture provided for that p

Press the button 5 to activate and confirm your choice. A black dash appears under theselected symbol to indicate that this option has been set. Press

SUPER QUICK: by pressing button 6 twice, the corresponding symbol remains lit on thedisplay and the washing duration will be reduced to wash lightly s

Altering an option or a running programmeIt is possible to change some options before the programme carries them out. Before youmake any change, you m

Washing programmesProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompar

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentEASY IRON PLU

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentDELICATE SPIN

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentECONOMY (ECO

Remove persistent stains before washing.Rub particularly soiled areas with a special detergent or detergent paste.Treat curtains with special care. Re

Thank you for choosing one of our high-quality products.To ensure optimal and regular performance of your appliance please read thisinstruction manual

Ink: depending on the type of ink, moisten the fabric first with acetone1), then with aceticacid; treat any residual marks on white fabrics with bleac

DescalingThe water we use normally contains lime. It is a good idea to periodically use a watersoftening powder in the machine. Do this separately fro

2. Flush it out under a tap, to remove anytraces of accumulated powder.3. Having removed the drawer, use a smallbrush to clean the recess, ensuring th

Drain pumpThe pump should be inspected regularly and particularly if:• the machine does not empty and/or spin• the machine makes an unusual noise duri

7. Put the cap back on the emergency emp-tying hose and place the latter back in itsseat.8. Screw the pump fully in.WARNING!When the appliance is in u

is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until waterstops flowing out;5. clean the pump if necessary as previously

Problem Possible cause/SolutionThe washing machine does not start:The door has not been closed. • Close the door firmly.The plug is not properly inser

Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent(creates too much foam) has been used.• Reduce th

Problem Possible cause/SolutionSpinning starts late or the machine does notspin:The electronic unbalance detection device hascut in because the laundr

Spin Speed Maximum 1400 rpmConsumption valuesProgramme Energy consumption(KWh)Water consumption(litres)Programme duration(Minutes)White Cottons 95° 2.

Building-in 35Environment concerns 37Packaging materials 37Ecological hints 37Subject to change without noticeOperating instructions Safety

1. After removing all the packaging, careful-ly lay machine on it’s back to remove thepolystyrene base from the bottom.2. Remove the power supply cabl

4. Unscrew and remove the two large rearbolts B and the six smaller bolts C . Re-move the bracket D .5.Tighten up the six smaller bolts C . Slideout t

If it is impossible to avoid positioning the machine next to a gas cooker or coalburningstove, an insulating panel covered with aluminium foil on the

3. Set the hose correctly by loosening thering nut. After positioning the inlet hose,be sure to tighten the ring nut again toprevent leaks.4. Connect

This could be done by tying it to the tapwith a piece of string or attaching it to thewall.2.In a sink drain pipe branch. This branchmust be above the

WARNING!Should the appliance power supply cable need to be replaced, this must be carriedout by a Service Centre.Building-inThis appliance has been de

•DoorThe dimensions of the door should be:– width 595-598 mm– thickness 16-22 mmThe height (C-Fig. C ) depends on the height ofthe adjacent furniture&

If the door has to be opened from left to right,invert the position of the plates (7), the magnet(4) and the plate (5) (Fig. B and E ). Mount thecount

38

39

Installation• This appliance is heavy. Care should be taken when moving it.• When unpacking the appliance, check that it is not damaged. If in doubt,

www.electrolux.com132 956 760-00-112009

Child Safety• This appliance is not intended for use by person (including children) with reduced physicalsensory or mental capabilities or lack of exp

1653421 Detergent dispenser drawer2 Control panel3 Door opening handle4 Rating plate5 Drain pump6 Adjustable feet Compartment for prewash phase or sta

Control panelBelow is a picture of the control panel. It shows the programme selector dial as well as thebuttons and the display. These are presented

• During a washing cycle, a black line blinks under the washing phase symbol of the runningprogramme. At the end of each washing phase, the line under

First use• Ensure that the electrical and water connections comply with the installation instruc-tions.• Remove the polystyrene block and any material