
Switching off the acoustic signal
Step Control panel field Acoustic signal
1.
Touch
Acoustic signal to acknowledge.
Acoustic signal stops.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
10 seconds, a signal sounds and the cooking surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself
off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more than 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor fields are no longer covered.
Cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the heat setting
is not modified, the relevant cooking zone switches off automatically.
is displayed.
Before being used again, the cooking zone must be set to
.
Heat setting Switches off after
-
6 hours
-
5 hours
-
4 hours
-
1.5 hours
Tips on cooking and frying
Information about acrylamides
According to the latest scientific research, intensive browning of food, especially in products
containing starch, may present a health risk due to acrylamide. Therefore we recommend
cooking at low temperatures and not browning foods too much.
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom should be
as thick and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can leave
discolorations on the glass ceramic surface which are difficult or impossible to remove.
Tips on cooking and frying
11
Kommentare zu diesen Handbüchern