Aeg-Electrolux HG795540XB Bedienungsanleitung Seite 1

HG795540XBGB ENGAS HOB USER MANUAL

Before switching on, make sure the electricity supply voltage is the same as that indicatedon the hob rating plate. The rating plate is located on the

Replacement of the connection cableTo replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure thatthe cable section is appli

50 cm2360 cm2180 cm2120 cm2MANUFACTURER:ELECTROLUX ITALIA S.p.A.C.so Lino Zanussi, 3033080 PORCIA (PN) - ITALIAPRODUCT DESCRIPTIONCooking surface layo

To light the burner:1. Turn the control knob counterclockwise to the maximum position ( ) and push itdown.2. Keep the control knob pushed for appro

12341 Burner cap2 Burner crown3 Ignition candle4 ThermocoupleWARNING!Do not keep the control knob pushed for more than 15 seconds.If the burner does n

WARNING!Use pots and pans with diameter applicable to the dimension of burner.Do not use cooking vessels on the hotplate that overlap its edges.Burner

• You can remove the pan supports to easily clean the hob.• To clean the enamelled parts, cap and crown, wash it with warm soapy water and dry itcaref

Problem Possible cause Remedy • Burner cap and crown areplaced uneven• Make sure that the burnercap and crown are in correctpositions.The flame is bl

TECHNICAL DATAHob dimensionsWidth: 766 mmLength: 516 mmHob recess dimensionsWidth: 750 (0 / +2) mmLength: 490 (0 / +2) mmHeat inputTriple Crown burner

BURNERNORMALPOWERREDUCEDPOWERNORMAL POWERNATURAL GASG20 (2H) 20 mbarLPG (Butane/Propane)G30/G31 (3+) 28-30/37 mbarkW kWinj. 1/100mmm³/hinj. 1/100mmG30

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

www.aeg.com/shop 397196901-A-012011

CONTENTS4 Safety information6 Installation12 Product description12 Operation14 Helpful hints and tips15 Care and cleaning16 What to do if…18 Technical

SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor

• Pots must not enter the control zone.• Do not use not stable cookware to prevent from tilt and accident.• Do not put flammable products or items tha

• This appliance is not connected to a combustion products evacuation device. It must beinstalled and connected in accordance with current installatio

Important safety requirementsThis hob must be installed in accordance with the Gas Safety (Installation and Use) Regula-tions (Current Edition) and th

1231 End of shaft with nut2 Washer3 ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connec

Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the contr