Aeg-Electrolux HG795540XB Bedienungsanleitung

HG795540XBGB ENGAS HOB USER MANUAL

Electrical RequirementsPermanent electrical installation must comply with the latest I.E.E. Regulations and localElectricity Board regulations. For yo

WARNING!Make sure that the cut off plug is disposed of safely. A cut off plug put into a 13 amp sock-et is a safety hazard. There is a risk of electri

Kitchen unit with ovenThe hob recess dimensions must obey the indication and the kitchen unit must be equippedwith vents to let a continuous supply of

Always light the burner before you put cookware.To light the burner:1. Turn the control knob counterclockwise to the maximum position ( ) and push

12341Burner cap2Burner crown3Ignition candle4ThermocoupleWARNING!Do not keep the control knob pushed for more than 15 seconds.If the burner does not l

WARNING!Use pots and pans with diameter applicable to the dimension of burner.Do not use cooking vessels on the hotplate that overlap its edges.Burner

CARE AND CLEANINGWARNING!Switch the appliance off and let it cool down before you clean it. Disconnect the appliancefrom the electrical supply, before

WARNING!Do not slide cookware over the glass because it could scratch the surface. Also, do not lethard or sharp objects fall onto the glass or hit th

MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO.SER.NO.03 ITMADE IN ITALYTYPE230V-50HzIP2000491 2 31Stick it on Guarantee Card and

Electric supply: 230 V ~ 50 Hz3 core flexible cable with non rewireable plugfitted with a 3 amp cartridge fuseCategory: II2H3+Gas connection: R 1/2&qu

FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn

Packaging materialThe packaging materials are friendly to the environment and can be recycled. The plasticcomponents are identified by marking: >PE

21

22

23

www.aeg.com/shop 397249301-A-392011

CONTENTS4 Safety information7 Installation12 Product description12 Operation14 Helpful hints and tips16 Care and cleaning17 What to do if…18 Technical

SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor

• The cookware must not enter the control zone.• Make sure that the cookware does not protrude over the edges of the cooking surfaceand that it is cen

• Before installation, make sure that the local supply conditions (gas type and pressure)agree with the adjustment of appliance. The adjustment condit

INSTALLATIONWARNING!The following instructions about installation, connection and maintenance must be carriedout by qualified personnel in compliance

1231End of shaft with nut2Washer3ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connectio

Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.