Aeg-Electrolux 75580G-M Bedienungsanleitung PDF herunterladen (Seite 15)

IMPORTANT

This hob must be installed by a competent person to the relevant Gas Standards.

Any gas installation must be carried out by a registered competent person.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the

event of a breakdown.

The manufacturer will not accept

liability, should the above

instructions or any of the other

safety instructions incorporated in

this instruction booklet be ignored.

On the end of the shaft, which includes

the G 1/2" threaded elbow, adjustment

is fixed so that the washer is fitted

between the components as shown in

the diagram. Screw the parts together

without using excessive force.

A) End of shaft with nut

B) Washer

C) Elbow

It is important to install the elbow correctly, with the shoulder on the end of the

thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

WARNING

Check to be sure that all connections to the unit are completely gas-tight; use a soap

solution to do this, never a flame.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or

copper.

The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).

When the final connection has been made, it is essential that a thorough leak test is

carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Keine Kommentare

Aeg-Electrolux 75580G-M Bedienungsanleitung Seite 15