Aeg-Electrolux E8831-7-M Bedienungsanleitung PDF herunterladen (Seite 29)

Replacing the oven lamp:

1. You can find the lamp glass cover at the left side of the cavity.

Remove the left shelf support rail.

2. Use a narrow, blunt object (e.g. a tea-

spoon) to take off the glass cover and

clean it.

3. If necessary: Replace the oven light bulb

with applicable 300°C heat-resistant

oven light bulb.

Use the same oven lamp type.

4. Install the glass cover.

5. Install the left shelf support rail.

Oven Ceiling

You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.

WARNING!

Before you fold down the heating element switch off the appliance. Make sure that the

appliance is cold.

There is a risk of burns!

Folding down the heating element

1. Remove the shelf support rails.

2. Hold the heating element with the two

hands at the front

3. Pull it forwards against the spring pres-

sure and out along the support on both

sides.

4. The heating element folds down.

The oven ceiling is ready to clean.

Installing the heating element

1. Install the heating element in opposite

sequence.

Install the heating element correctly on the two sides above the support on the inner

wall of the oven.

2. Insert shelf support rails.

Oven door and glass panels

To clean the oven door remove it.

CAUTION!

Be careful when you remove the door from the appliance. The door is heavy!

Care and cleaning

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Aeg-Electrolux E8831-7-M Bedienungsanleitung Seite 29