Aeg-Electrolux HG694340XB Bedienungsanleitung Seite 1

HG694340XBIE GB ENGAS HOB USER MANUAL

This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.Before switching on, make sure the electricity supply voltage is the same a

Replacement of the connection cableTo replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure thatthe cable section is appli

50 cm2360 cm2180 cm2120 cm2MANUFACTURER:ELECTROLUX ITALIA S.p.A.C.so Lino Zanussi, 3033080 PORCIA (PN) - ITALIAPRODUCT DESCRIPTIONCooking surface layo

Always light the burner before you put cookware.To light the burner:1. Turn the control knob counterclockwise to the maximum position ( ) and push

Turning the burner offTo put the flame out, turn the knob to the symbol .WARNING!Always turn the flame down or switch it off before you remove the p

CARE AND CLEANINGWARNING!Switch the appliance off and let it cool down before you clean it. Disconnect the appliancefrom the electrical supply, before

Periodic maintenancePeriodically speak your local Service Force Centre to check the conditions of the gas supplypipe and the pressure adjuster, if fit

MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO.SER.NO.03 ITMADE IN ITALYTYPE230V-50HzIP2000491 2 31 Stick it on Guarantee Card an

Electric supply: 230 V ~ 50 Hz3 core flexible cable with non rewireable plugfitted with a 3 amp cartridge fuseCategory: II2H3+Gas connection: G 1/2&qu

Packaging materialThe packaging materials are friendly to the environment and can be recycled. The plasticcomponents are identified by marking: >PE

FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno

www.aeg.com/shop 397196701-B-032011

CONTENTS4 Safety information6 Installation12 Product description12 Operation14 Helpful hints and tips15 Care and cleaning16 What to do if…17 Technical

SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor

• Pots must not enter the control zone.• Do not use not stable cookware to prevent from tilt and accident.• Do not put flammable products or items tha

• This appliance is not connected to a combustion products evacuation device. It must beinstalled and connected in accordance with current installatio

Important safety requirementsThis hob must be installed in accordance with the Gas Safety (Installation and Use) Regula-tions (Current Edition) and th

1231 End of shaft with nut2 Washer3 ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connec

1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.4. With a thin screwdriver, adjust the by-pass screw position.11 The